Pitch of 1.5mm, teeth ground and set. Usable on hard and soft woods, plywood, fibreglass reinforced sheets as well as soft plastics. Fits SS 230/E and STS 12/E.
Tooth pitch of 1.06mm, with teeth set and ground. Usable on metals, non-ferrous metals, aluminium and softer alloys, fibreglass, Plexiglass and insulating materials. Fits SS 230/E and STS 12/E.
58mm diameter (10mm bore). 80 alternately set teeth. Ideal for hard and soft wood as well as plastic and Pertinax. For fast, clean cuts. Teeth are individually set and sharpened. Superior cutting power!
High durability aluminium oxide pads. Deposited on special backing paper. Hook & loop type.
High durability aluminium oxide pads. Deposited on special backing paper. Hook & loop type.
High durability aluminium oxide pads. Deposited on special backing paper. Hook & loop type.
Elektrische multitool, Merk: Proxxon, Snelheid: 5.000 - 20.000/min, Vermogen: 100 Watt, Voeding: Netstroom, Lengte: 230mm.
Only 0.6mm thick. For cutting and sanding of porcelain, ceramics, glass fibre boards, plastic and nonferrous metals. Shaft of Ø 2.35mm.
50mm Ø x 1.1mm (10mm bore). 10 teeth. Used to cut hard and soft woods, PC cards, PERTINAX and aluminium.
Manufactured from a one-piece blank in tungsten vanadium steel for highest concentricity, providing breakage safety and long lifetime. For drilling metal, non-ferrous metals, plastic and wood. All shanks Ø 3/32"" (2.35mm). Work speeds: soft materials...
Manufactured from a one-piece blank in tungsten vanadium steel for highest concentricity, providing breakage safety and long lifetime. For drilling metal, non-ferrous metals, plastic and wood. All shanks Ø 3/32"" (2.35mm). Work speeds: soft materials...
Manufactured from a one-piece blank in tungsten vanadium steel for highest concentricity, providing breakage safety and long lifetime. For drilling metal, non-ferrous metals, plastic and wood. All shanks Ø 3/32"" (2.35mm). Work speeds: soft materials...
Voor het splitsen van metaal (body's), hout (binnenafwerking, modelbouw), GVK, kunststof, gips en veel andere materialen. Dankzij de ronde uitsparing kunt u tot in moeilijk bereikbare hoeken...
Cut-off wheel for long neck angle grinder Ideal for cutting steel, non-ferrous metals, smaller plastic and wooden bars.
Razendsnel gemonteerd. De verplaatsing kan naar keuze via de hoogteverstelling (verticaal) of het fijntransport ook in schuine stand plaatsvinden. Met gradenaanduiding (tot 0 instelbaar). Ee...
Made of HSS steel. DIN 333 (type A) 60°. Complete set centre drills with sizes of 2.0 - 2.5 and 3.15mm.
Clamps up to 5.0 mm. Is inserted on the spot of the rotating back centre. The feed movement results from sliding the complete tailstock.
Letters AZ, includes hyphen, full stop and slash. Also numbers 09. For use with guide bar of the GE 70.
50mm Ø x 1.1mm (10mm bore). 20 teeth. For extremely clean cuts of balsa, plywood. Can also be used for cutting PC cards and POLYCARBONATE.
50mm diameter (10mm bore). Alloy holding a high proportion of tungsten, vanadium and molybdenum for an even structure, high hardness and long lifetime. Fine-toothed. For very fine cuts in non-ferrous metals (aluminium, brass, copper). Also suitable for...
Spare Cutting Wire for the Hotwire Thermo Cutter
Ideaal voor het zagen alle gangbare staalsoorten, non-ferro metalen en roestvrij staal.
Of special tempered steel, with induction-hardened coarse teeth (14 TPI). Especially suited for aluminium and plastics.
With consistently even coating of diamond dust. For fine detail work, grinding, finishing and engraving hard materials: steel (even chrome-cobalt alloy), glass, stones, ceramics, porcelain, plastics. Shank 3/32"" (2,35 mm) made from stainless steel Contents:...
With consistently even coating of diamond dust. For fine detail work, grinding, finishing and engraving hard materials: steel (even chrome-cobalt alloy), glass, stones, ceramics, porcelain, plastics. Shank 3/32"" (2,35 mm) made from stainless steel Contents:...
With consistently even coating of diamond dust. For fine detail work, grinding, finishing and engraving hard materials: steel (even chrome-cobalt alloy), glass, stones, ceramics, porcelain, plastics. Shank 3/32"" (2,35 mm) made from stainless steel Contents:...
With consistently even coating of diamond dust. For fine detail work, grinding, finishing and engraving hard materials: steel (even chrome-cobalt alloy), glass, stones, ceramics, porcelain, plastics. Shank 3/32"" (2,35 mm) made from stainless steel Contents:...
For polishing metal, glass, precious metals, porcelain and plastic. Consisting of 3 felt polishing bits (cylinder, cone and wheel shapes), 3 silicon polishing bits (bullet, cylinder and disc shape), cotton polishing disc, chamois buffing wheel and polishing...
This universal solid-compound is used with cotton, felt, or suede polishing wheels or tips for high gloss polishing.
Used for surface smoothing and polishing of precious metals, non-ferrous metals, high-grade metals, glass, porcelain, wood, rubber and plastic. The bullets are very suitable for working tough-to-reach insides. Shafts of Ø 2.35mm.
For drilling, cutting and separating fiberglass reinforced plastic, thermosetting plastic, nonferrous metals, also for drilling into pearls, corals, etc. All shanks Ø 3/32"" (2.3mm).
For drilling, cutting and separating fiberglass reinforced plastic, thermosetting plastic, nonferrous metals, also for drilling into pearls, corals, etc. All shanks Ø 3/32"" (2.3mm).
With ideal cutting angle of 6°. Especially for drilling in glass, porcelain, ceramics, marble (also semi-precious stones) and other hard stones. All shanks Ø 7/64"" (3mm). 2/pk
With ideal cutting angle of 6°. Especially for drilling in glass, porcelain, ceramics, marble (also semi-precious stones) and other hard stones. All shanks Ø 7/64"" (3mm). 2/pk
For the clean storage of micro drills, grinding bits, brushes and other rotating tools with shaft diameters of 2.35, 3.0 and 3.2mm (1/8""). Use them to keep your micro-drills, grinding bits, cleaning and polishing bits and other tools separate, tidy and...
Ø 85 x 0.5 x 10mm. 80 teeth. Use on hard and soft woods, plastics.
Ø 80 x 1.5 x 10mm. 36 teeth. Use to cut balsa, plywood, hard and soft woods, POLYCARBONATE, plastic, aluminium and PC cards.
Ø 80 x 1.6 x 10mm. 24 teeth. Use on aluminium, hard wood, laminates, plastics.
Rasp cutter of tungsten vanadium with 1/8"" (3.2 mm). Ideal for wall tiles, wood, stoneware, plastic and dry wall. Can be use with Tile Cutting Attachment FEX (28756) Shank 3/32"" (2.35mm)
Manufactured from a one-piece blank in tungsten vanadium steel for highest concentricity, providing breakage safety and long lifetime. For drilling metal, non-ferrous metals, plastic and wood. All shanks Ø 3/32"" (2.35mm). Work speeds: soft materials...
Manufactured from a one-piece blank in tungsten vanadium steel for highest concentricity, providing breakage safety and long lifetime. For drilling metal, non-ferrous metals, plastic and wood. All shanks Ø 3/32"" (2.35mm). Work speeds: soft materials...
For drilling in steel, sheet metal, cast iron, non-ferrous metals, wood, plastics etc. One each of # 80, # 76, # 67, # 61, # 56, # 53, # 47, # 46, # 32 and # 31 (0.3, 0.5, 0.8, 1.0, 1.2, 1.5, 2.0, 2.5, 3.0, 3.2mm). 10 Piece Set